Boltek EFM-INV2 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} Boltek EFM-INV2에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Boltek EFM-INV2 13 페이지. Inverting mounting kit

10/15/2020

Choosing a Mounting Location

Choosing a suitable mounting location is the single most important aspect of a successful installation:

Locate at least 10 feet/3m away from any obstructions and edges of the roof line.

Keep height within 2 to 3 feet between sensor and the ground/roof surface. If installed higher, adjust

the sensitivity using one of the supplied attenuator plugs.

KEEP CLEAR AREA

Persons or animals entering the Keep Clear Area may be detected by the field mill as a High Electric Field

or Lightning. If the field mill is mounted at ground level a fence or other barrier should be erected

around the field mill. Keep the area directly under the field mill clear of long grass or weeds. Patio slabs

or a poured concrete pad is recommended for ground installations.

EFM-INV_Instruction_1.3