Boltek EFM-INV3 설치 지침 매뉴얼 - 페이지 6

{카테고리_이름} Boltek EFM-INV3에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Boltek EFM-INV3 13 페이지. Inverting mounting kit

10/15/2020

Assembling the pole mount bracket

Remove nuts and washers from the two U-Bolts and place around inverted mast. Secure bolts

to bracket as shown below

Open hose clamps, and hold bracket against pole. Place hose clamps through bracket and

tighten around pole or tripod mast. Recommended pole size is between 2.5" and 4" outer

diameter. If a larger pole is used, bigger hose clamps can be purchased at a local hardware

store.

EFM-INV_Instruction_1.3