Advance acoustic 9087331020 사용 설명서 지침 - 페이지 4

{카테고리_이름} Advance acoustic 9087331020에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Advance acoustic 9087331020 20 페이지.

ENGLISH

INTRODUCTION

NOTE

The numbers in brackets refer to the components shown in Machine Description chapter.

The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and

autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.

Before performing any procedure on the machine, the operators and qualified technicians must read this Manual carefully. Contact

Advance in case of doubts concerning the interpretation of the instructions and for any further information.

This Manual is intended for operators and technicians qualified to perform the machine maintenance.

The operators must not perform procedures reserved for qualified technicians. Advance will not be answerable for damages coming

from the non-observance of this prohibition.

The Instruction for use Manual must be kept near the machine, inside an adequate case, away from liquids and other substances

that can cause damage to it.

The machine model and serial number are marked on the plate (29).

Product code and year of production are marked on the same plate.

This information is useful when requiring machine spare parts. Use the following table to write down the machine identification data.

MACHINE model ...............................................................................

PRODUCT code ................................................................................

MACHINE serial number ...................................................................

Electronic Battery Charger Manual, to be considered as integral part of this Manual

Moreover, the following Manuals are available:

–

Service Manual (that can be consulted at Advance Service Centers)

–

Spare Parts List (supplied with the machine)

All necessary operating, maintenance and repair procedures must be performed by qualified personnel or by Advance Service

Centers.

Only original spare parts and accessories must be used.

Contact Advance for service or to order spare parts and accessories, specifying the machine model, product code and serial

number.

Advance constantly improves its products and reserves the right to make changes and improvements at its discretion without being

obliged to apply such benefits to the machines that were previously sold.

Any change and/or addition of accessories must be approved and performed by Advance.

INSTRUCTION FOR USE

SC450 - 9099602000