Dormakaba ED connection board CAN 조립 설명서 - 페이지 8

{카테고리_이름} Dormakaba ED connection board CAN에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dormakaba ED connection board CAN 16 페이지.

Mounting

11. Connect the CAN connection cable to the connection terminals (5) for the

radar sensor M A01, see also

Connect the CAN connection cable to the connection terminal for EntriWorX

(8), see also EntriWorX manual.

Connect the CAN connection cable to the connector plug for EntriWorX (9),

see also EntriWorX manual.

12. Pull out the open cable ends of all other cables and connect them.

13. Connect all other cables according to the mounting and commissioning

instructions for the ED 100/250.

14. Plug the ribbon cable back into the connection socket (7), see "".

15. Insert the serial connection cable into the connection socket (4).

16. NOTICE! Guide/stow all cables inside the operator in the cable ducts or

secure with a cable holder to prevent collisions with moving parts!

17. Plug the RJ45 plug of the serial connection cable into the socket (5) next to

the user interface (6), see "Note the structure of the ED 100/250 drive [} 4.1]".

ED connection board CAN

Radar sensor M A01 mounting

Assembly Instruction

instructions.

060636 45532/16923 - 2023-04