Dormakaba UNIQUIN 설치 지침 - 페이지 4

{카테고리_이름} Dormakaba UNIQUIN에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dormakaba UNIQUIN 8 페이지. Door closer system
Dormakaba UNIQUIN에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지)

페이지 인쇄

dormakaba Mounting instructions

3.4.2 Dimensions

Fig. 6

Dimensions of a mounted door closer system

4 Storage and

transport

CAUTION

Risk of crushing and collision due to

unsecured components.

Unsecured components can lead to crushing

or impact injuries during transport.

• Secure components adequately during

transport.

ATTENTION

Risk of damage during transport.

Unsecured components may be damaged

during transport.

• Secure components adequately during

transport.

5 Mounting

preparation

5.1

Tools for mounting

• A screwdriver Torx T25

• A hexagon socket set

• A torque wrench

UNIQUIN Door Closer System

10-19

WN 059547 45532

5.2 Check mounting conditions

Requirement

• The door frame system is mounted.

Make sure that the installation situation for the

door closer system's mounting is available (Abb.

5).

TIPS AND RECOMMENDATIONS

Screw threads for the door closer cannot be

cut into the door frame's cover profile later.

2. Make sure that the opening angle of the glass

door is correctly limited according to the

installation situation, e.g. by a doorstop.

→ The mounting conditions have been checked.

5.3 Prepare mounting

Remove the brackets from the mounting plate

(Abb. 7 and Abb. 8).

Fig. 7

Unscrew the brackets

Fig. 8

Disassemble the brackets

Storage and transport

2019-08