CANTERBURY Z1408 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} CANTERBURY Z1408에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CANTERBURY Z1408 13 페이지. Basin mixer with automatic pop-up waste

Installation Instructions
Install the O-ring 10, into the recess of the
on the bottom face of the cover plate 9.
Feed the cover plate 9, onto the tap side
body, until it is flush with the counter top
surface.
 Thread the retaining flange and handle 8,
onto the cartridge, securing it firmly by
hand only. See the "Removing and replacing
a handle", on page "10" for additional
details.
Install the water supply hose 12, into tap
the body 11.
- Note: Hand tighten only, DO NOT over
tighten- 12!
Install the second water supply hose 14,
and supplied mounting stud 13, and
verify that they are securely installed.
- Note: Hand tighten the supply hose only, DO
NOT over tighten- 13!
Further information Phone (03) 9761 4603
5
Model : Z1408
Continue.......