CANTO USA A10857190 사용 설명서 - 페이지 9

{카테고리_이름} CANTO USA A10857190에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CANTO USA A10857190 10 페이지. Tango 1500 msr ff 120v, black

Followspot Operating Instructions

Innovative Lighting Products

FOCUSING:

This fixture features a variable beam angle from 4º to 8º. The variable beam is altered by adjusting the front and rear zoom

lenses in relation to each other. The front lens defines the beam spread, the rear lens then focuses the degree of 'softness' or

'hardness' of the beam edge or shutters.

BLACK-OUT MECHANICAL DIMMER (DOUSER):

Your followspot is fitted with an adjustable mechanical dimmer (douser) to dim and finally blackout the light. The black‐out

mechanical dimmer is located between the front of the lens tube and the color changer. A screen printing is provided on

the upper front cover of the lens tube (near the lever operating the douser) to help you position the douser at the required

dimming position (0% - 100%)

To ensure maximum performance of the product, a regular maintenance service should be carried out. Please make sure the

product is cold and disconnected from power supply when doing this. Use a clean cloth and non-abrasive glass cleaner like

denatured alcohol.

GENERAL MAINTENANCE:

Clean all reflective parts such as reflector, mirrors, and lenses as necessary. Check the lamp and the lenses and replace

any visibly damaged component. Clean air ducts and fans in order to allow proper ventilation activity on the product, we

recommend vacumming NOT blowing. Check internal and external wiring and replace any cable which shows wear and tear.

WARNING: NEVER USE AMMONIA, BLEACH, VINEGAR, OR WINDOW CLEANER, WHICH CAN HARM OUR

COATED LENSES.

CLEANING OF OPTICAL COMPONENTS:

LAMP HOUSE LENS ASSEMBLY:

Open the lens compartment by removing the two M4 Phillips head screws on the top of the lamp house. To remove the

lens/reflector assembly block, remove the two M5 Phillips head screws in front on both sides. Clean the lens/mirror with

a soft cloth.

ZOOM LENSES:

Slide the bottom access door(s) of the lens tube forward or back to access the optics and clean with a soft microfiber cloth.

1092 West Atlanta Street, SE • Suite 600 • Marietta, GA 30060 • 888-252-5912 • [email protected] • cantousa.com

V 1.1 2/25/21