CANTO USA Astro 250 사용 설명서 - 페이지 7

{카테고리_이름} CANTO USA Astro 250에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CANTO USA Astro 250 20 페이지.

Followspot Operating Instructions

Innovative Lighting Products

11 MENU:

There are fourteen different menus to control the settings of ASTRO LED. The rotary selector is used to adjust the settings

and to navigate through the menu. Turn left or right to select the menu and push to access or to confirm the selected data or

functions. To exit the selected menus without saving the data, press the rotary selector for at least 1 second.

11.1 DMX OR MANUAL (MODE):

Select the LED control mode between OMX (factory setting) and manual. To change the control mode press once the rotary

selector until an arrow (0) appears on the menu. Turn the selector to the right or the left to select the desired mode of

operation and press to confirm your selection.

Tap the rotary selector and the LCD screen will display the mode status and the current value:

11.2 DMX ADDRESS (ADDR):

It allows to select the initial DMX starting address to remotely control the LED functions. To change the initial DMX address

press the rotary switch until an arrow appears, then turn to change to the desired DMX starting address. Press to confirm

your selection. Factory setting is 001.

1092 West Atlanta Street, SE • Suite 600 • Marietta, GA 30060 • 888-252-5912 • [email protected] • cantousa.com

V 1.0 4/19/22