Asus TUF B365-PLUS GAMING 매뉴얼 - 페이지 19

{카테고리_이름} Asus TUF B365-PLUS GAMING에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus TUF B365-PLUS GAMING 37 페이지.
Asus TUF B365-PLUS GAMING에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄
Asus TUF B365-PLUS GAMING 매뉴얼
1.4

System memory

Overview
This motherboard comes with four Double Data Rate 4 (DDR4) Dual Inline Memory Module
(DIMM) sockets. The figure illustrates the location of the DDR4 DIMM sockets:
•
•
•
•
•
•
•
1-10
You may install varying memory sizes in Channel A and Channel B. The system
maps the total size of the lower-sized channel for the dual-channel configuration. Any
excess memory from the higher-sized channel is then mapped for single-channel
operation.
Always install DIMMs with the same CAS latency. For optimal compatibility, we
recommend that you install memory modules of the same version or date code (D/C)
from the same vendor. Check with the retailer to get the correct memory modules.
According to Intel
®
CPU spec, DIMM voltage below 1.35V is recommended to protect
the CPU.
Due to Intel
chipset limitation, DDR4 2666MHz and higher memory modules will run
®
at max. 2666MHz on Intel
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value.
For system stability, use a more efficient memory cooling system to support a full
memory load (4 DIMMs).
Refer to www.asus.com for the latest Memory QVL (Qualified Vendors List)
Channel
Channel A
Channel B
®
8th Gen. 6-core or higher processors.
Sockets
DIMM_A1 & DIMM_A2
DIMM_B1 & DIMM_B2
Chapter 1: Product Introduction