Asus XG-DLS 설치 매뉴얼

{카테고리_이름} Asus XG-DLS에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus XG-DLS 4 페이지. Xeon installation procedure central processing unit (cpu)

Xeon Installation Procedure

Central Processing Unit (CPU)

This motherboard provides two Single Edge Contact (SEC) Slot 2 connectors for

either one or two Intel

only one processor is used, the other Slot 2 connector must be terminated with the

provided front side bus termination module.

NOTE:

The pictures in the following pages will have the same item numbers

next to them for your reference. The following pictures are for reference only

and are not to size. The design and color of your items may be slightly different.

You should check to see that you have the following items with your motherboard:

(Item 1) Metal Baseboard x 1

(Item 2) Rubber Pad x 1

(Item 3) Retention Mechanism x 2

NOTE: For the retention mechanism and lock bar, there is a left and a right side. The left side has a single

dot and the right side has two dots (when holding the motherboard with the ATX connectors to the left).

(Item 4) Captive

(Item 5) Cartridge

Nut x 15 (in bag)

Lifter x 4

Xeon™ processors packaged in an SEC cartridge. When

(Item 6) Retention Mechanism Brace Bar x 2

(Item 7) Front Side Bus Termination Module

(Item 9) Retention Mechanism Support Frame x 2

ASUS Xeon Installation Guide

(Item 8) Retention Mechanism Cap x 2

E338