Asus Z97-C 매뉴얼 - 페이지 34
{카테고리_이름} Asus Z97-C에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus Z97-C 48 페이지.
페이지 인쇄
8.
USB 2.0 connectors (10-1 pin USB910, USB1112, USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
48 Mb/s connection speed.
I II
Z97-C
Z97-C USB2.0 connectors
DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
9.
Intel
®
Serial ATA 6 Gb/s connectors (7-pin SATA6G_56, SATAEXPRESS)
These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s
signal cables.
I II
Z97-C
Z97-C Intel
1-20
PIN 1
®
SATA 6 Gb/s connectors
you use both connectors, the system automatically detects the devices connected
to these connectors and set a higher priority to M.2 Socket 3 than SATAEXPRESS
interface. Refer to section 3.6.3 PCH Storage Configuration of this user guide for
more details.
devices.
USB910
USB1112
USB1314
PIN 1
PIN 1
Chapter 1: Product introduction