Asus Z97I-PLUS 매뉴얼 - 페이지 24

{카테고리_이름} Asus Z97I-PLUS에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus Z97I-PLUS 46 페이지.

Memory configurations

You may install 2GB, 4GB, and 8GB unbuffered and non-ECC DDR3 DIMMs into the DIMM

sockets.

1-10

memory from the higher-sized channel is then mapped for single-channel operation.

the CPU.

recommend that you obtain memory modules from the same vendor.

or more memory on the motherboard, the actual usable memory for the OS can be

about 3GB or less. For effective use of memory, we recommend that you do any of the

following:

Use a maximum of 3GB system memory if you are using a 32-bit Windows

Install a 64-bit Windows

motherboard.

For more details, refer to the Microsoft

com/kb/929605/en-us.

(Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1 Megabyte/MB).

(SPD), which is the standard way of accessing information from a memory module.

Under the default state, some memory modules for overclocking may operate at a

lower frequency than the vendor-marked value. To operate at the vendor-marked

or at a higher frequency, refer to section 3.5 Ai Tweaker menu for manual memory

frequency adjustment.

memory load (2 DIMMs) or overclocking condition.

The stability and compatibility of the memory modules depend on the CPU's

capabilities and other installed devices.

we recommend that you install memory modules of the same version or data code (D/

C) from the same vendor. Check with the vendor to get the correct memory modules.

the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support.

OS when you want to install 4GB or more on the

support site at http://support.microsoft.

Chapter 1: Product introduction

OS, when you install 4GB

OS.