Canvas HARLOW064-3504-2 조립 지침 매뉴얼 - 페이지 15

{카테고리_이름} Canvas HARLOW064-3504-2에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canvas HARLOW064-3504-2 20 페이지.

Pressing the power button will turn turn the unit ON or OFF.

When the unit is in ON mode, the power icon indicator light will glow green.

When the unit is in OFF mode, the power icon indicator light will glow red. If the heater is working when the

unit is powered OFF, the fan will continue to run for another 20 seconds to ensure heat will not be trapped

inside the unit.

Note: Each time the unit is plugged in, the fan and heater will turn on for 5 seconds as a programmed internal

check.

Note: Unless the main power is interrupted, the unit will remember the last heating level and flame brightness

settings.

Press the mode button to cycle through the different functions. Each time the mode button is pressed, the

mode will rotate through temperature, timer, or flame brightness modes.

Temperature Setting

The temperature mode controls the heater's thermostat setting.

Press the up arrow button or down arrow button to scroll through the pre-set temperature range from 15 to

30°C (59 to 86°F).

Hold the mode button for 3 seconds. This allows the unit to change from °C to °F or °F to °C. The unit

default is °F.

Note: This function is only available if using the control panel.

When the ambient temperature is higher than the set temperature, heater will turn off automatically.