Battery Fighter bca1702wr 사용 설명서 - 페이지 8
{카테고리_이름} Battery Fighter bca1702wr에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Battery Fighter bca1702wr 10 페이지. Intelligent battery charger for both lead acid & lithium (lipo & lifepo4) 12v automotive batteries
페이지 인쇄
In the Absorption phase the battery is given constant voltage while current is reduced based on actions taken from ongoing battery
monitoring until the battery is 100% charged.
8.
Analysis (Check) Phase:
The Battery will now be checked to ensure that it is holding a charge properly and the charger will determine if the battery is ready for
use or not.
9.
Maintenance Phase:
The battery can be left safely connected to the charger indefinitely. The charger will constantly monitor the battery and "turn-on" again
as needed to maintain the battery at a full state of readiness.
*Asterisk denotes a phase in Battery Recovery Processing
LiFePO & LiPO Charging Mode (Lithium Battery Charge Mode)
4 Stage Charge Process Map
1. Qualification Phase:
Once the charger has been properly connected to the battery it will deliver a constant pulse frequency to activate the PCM before it
enters into the charge program. Voltage and current are delivered at a specified rate to help the battery to recover prior to bulk
charge.
2. Bulk Charge Phase:
With the battery now having been activated and gone through the Qualification phase as needed the Bulk Charge phase gives the
battery constant current, taking the battery up to 80% of its full capacity.
3. Absorption Phase:
In the Absorption phase the battery is given constant voltage while current is reduced based on actions taken from ongoing battery
monitoring until the battery is 100% charged.
4. Full Charge :
Charging is complete and the battery can be returned to service or left safely on the charger indefinitely.
BCA1702WR - 140717
4 Stage LiFePo4 / LiPO Charge Process