Battery Tender 030-2030-WH 사용 설명서 - 페이지 4

{카테고리_이름} Battery Tender 030-2030-WH에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Battery Tender 030-2030-WH 7 페이지. 2000amp vehicle jump starter & portable power bank

페이지 인쇄

OPERATING INSTRUCTIONS

VEHICLE JUMP STARTER & PORTABLE POWER BANK FEATURES

JUMP STARTING A VEHICLE

1) Before jump starting your vehicle always check the manufacturer

instructions/recommendations/warnings first.

2) Check the internal battery charge status of the Vehicle Jump Pack by pressing

the ON/OFF button before jump starting your vehicle. There must be at least

50% of battery level available.

3) Insert the smart alligator clip connector into the end of the Jump Pack.

4) Connect the RED positive clip to the positive post on the battery, then the

BLACK negative clip to the negative post on the battery.

5) CAUTION: Ensure the Vehicle Jump Pack and smart alligator clip cables are

clear of all vehicle fan blades/belts/pulleys etc. before proceeding.

6) The LED on the smart alligator clips will then turn solid GREEN. Wait 5 to 10

seconds then start your vehicle

7) Remove the clips IMMEDIATELY after the vehicle has started. Black negative

clamp first.

8) DO NOT use the Vehicle Jump Starter to repeatedly try and start your vehicle.

Wait at least thirty (30) seconds between attempts. Check vehicle after three

attempts.