BatteryAide BGSM1 지침 - 페이지 4

{카테고리_이름} BatteryAide BGSM1에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. BatteryAide BGSM1 5 페이지. Smart battery charger

Charging function:

1. RESET

When connected to the battery & then the power supply, the device will automatically reset itself and

go into standby mode.

2. The unit will automatically establish the correct battery voltage and then start charging, at this point

the charging indicator will illuminate.

3. When the battery is fully charged the Full charged indicator will illuminate.

4. The charger will then maintain battery charge all the time it is connected

If the battery is frozen connect the battery in the normal way and when the unit indicates that it is

charging press the mode button so that the frost symbol indicator illuminates, the charger is then set for

charging a frozen battery.

If a battery is heavily depleted it will attempt to reclaim the battery.

If the battery is faulty the charger will not charge the battery, and will illuminate the fault indicator and

flash, if this situation occurs have the battery checked by your local car battery dealer

The fault indicator will also illuminate and flash if:-

The leads are wrongly connected (reverse popularity)

The leads are short circuited

MODEL# : BGSM1

Voltage :

12V 60Hz

Maximum power:

60W

Charging current:

6Vdc 0.8A ± 5%

12Vdc 3.8A ± 5%

Battery types:

Lead Acid, Calcium, Silver, AGM & GEL 3 – 120Ah

Protection:

IP 65

-3-