DAEWOO ELECTRONICS FN-102 Series 사용 설명서 - 페이지 3

{카테고리_이름} DAEWOO ELECTRONICS FN-102 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAEWOO ELECTRONICS FN-102 Series 5 페이지.

NAMES OF THE PARTS

1. CONTROL BOX

Regulates the operation of the motor and controls the inside temperature of the

refrigerator.

2. SHELF

Has full width and can slide out.

3. MAGNETIC DOOR SEAL

Keeps the refrigerator virtually airtight all along the edge, but is nevertheless easy to open.

4. USABLE RACK

for cans or jars.

5. BOTTLE RACK

for bottles, cans or jars.

6. COVER CASE DRAW

7. CASE DRAW

for bottles, cans or jars

8. CASE VEGETABLE

for vegetables.

Starting your new Refrigerator

1. Clean the refrigerator thoroughly.Wipe the outside with a soft dry cloth,the inside

with a damp cloth.

2. Keep the door open and insert the power supply cord into the socket.

3. Turn the thermostat dial to"7".Close the door and let the refrigerator operate for

15-20 minutes.

The freezer should then show some traces of frost.

Temperature control

You can control the inside temperature by

turning the thermostat dial.

"Max" means greater cooling power.

"Min" means less cooling power.

The dial does not have to be set exactly on the

letters, but can be any place in between.

NOTE : Wait 3 to 5 minutes before restarting if you unplug the machine.Unit may

fail to operate properly if restarted too quickly.

How to defrost

Defrost the refrigerator when the frost accumulated on the inside surface of

the refrigerator is about 5mm(1/5inch) thick.

Set the thermostat dial to "OFF". Remove foods. Defrosting usually takes a few

hours. To defrost quickly remove all foods from the refrigerator and leave door open.

Never use a knife or other metal instrument to remove ice/frost from the inside

surface of the refrigerator.

After defrosting , return the thermostat dial to the desired position to start refrigerating

again.