DAEWOO ELECTRONICS FRA-X22D 사용자 설명서 매뉴얼 - 페이지 15

{카테고리_이름} DAEWOO ELECTRONICS FRA-X22D에 대한 사용자 설명서 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAEWOO ELECTRONICS FRA-X22D 18 페이지.

페이지 인쇄

Refrigerator Leveling &

Door Adjustment

The refrigerator must be level in order to maintain optimal

performance and desirable front appearance.

(If the floor beneath the refrigerator is uneven, the freezer

and refrigerator doors look unbalanced.)

In case freezer door is lower than

refrigerator door...

Insert a screw driver (flat

tip) into a groove of the left

wheel (bottom of freezer)

and turn it clockwise until the

door is balanced. (Clockwise

to raise freezer door,

counterclockwise to lower.)

If the freezer door is not balanced by step 1, then

follow the next steps.

Open the doors, unscrew the

front cover and remove, if it is

attached.

Insert a spanner (A part) into the hinge nut (1 part) and

unscrew the nut by turning clockwise.

Insert a spanner (B part) into the hinge nut (2 part)

and turn clockwise to lower the door.

If the door is aligned, fasten the nut (1) tightly by turning

counter-clockwise.

In case refrigerator door is lower than

freezer door...

Insert a screw driver (flat tip)

into a groove of the right wheel

(bottom of refrigerator) and

turn it clockwise until the door

is balanced. (Clockwise to

raise refrigerator door,

counterclockwise to lower.)

(If needed)

If the refrigerator door is not balanced by step 1, then

follow the next steps.

Insert a spanner (A part) into the hinge nut (1 part) and

unscrew the nut by turning clockwise.

Insert a spanner (B part) into the hinge nut (2 part) and

turn counter-clockwise to tighten the door.

If the door is aligned, fasten the nut (1) tightly by

turning.

Front Cover

After installation and/or door leveling, fasten front cover with

screws. (Remove the screws on the front bottom panel first.

Click and screw the cover.)

Caution

The front of refrigerator needs to be just a little

higher than the back for easy door closing, but if

the wheel is raised too much for door balance,

i.e. the front of refrigerator is much higher than

the back, it can be difficult to open the door.