DAEWOO ELECTRONICS FRA-X22D 사용자 설명서 매뉴얼 - 페이지 9
{카테고리_이름} DAEWOO ELECTRONICS FRA-X22D에 대한 사용자 설명서 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAEWOO ELECTRONICS FRA-X22D 18 페이지.
페이지 인쇄How to use the Dispenser
(For dispenser models)
Select the 'WATER' or 'ICE' button and push the lever
smoothly with your cup.
Your selection will come out 1~2 seconds later.
Press the 'WATER' button and icon lights up.
Press the 'ICE' button and icon lights up.
WATER
When cleaning the icecubes case assembly or if
you will not use it for a long time, remove the
icecubes in the ice storage case and lock the
icemaker by pushing the 'ICE' button for 3 seconds.
Caution
Avoid using thin fragile cups or crystal glasses when
taking icecubes.
For your safety, never insert your fingers or other tools
into the dispenser outlet.
If you find the ice cubes are discolored, stop using
the dispenser and call the service agent.
CUBED ICE
How to use the Automatic
Icemaker
(For dispenser models)
About 10 icecubes (14~15 times a day) are made at one
time. If the ice storage case is full, icemaking stops.
It is normal for the icemaker to make banging sounds
when the icecubes are falling into the ice storage case.
To prevent bad odours or smells, regularly clean the
icecubes storage case.
If the amount of ice in the storage case is not sufficient,
the ice may not be dispensed. Wait a day or so to make
more ice.
If the ice does not dispense easily, ensure the dispenser
outlet is not blocked.
In case the icemaker doesn't work
If the icecubes get stuck and not
dispensed
Pull out the ice storage case and separate any icecubes
that may have stuck together.
If the amount of water which is supplied to the icemaker
needs adjusting, call for the service agent.
In case of power failure
The icecubes in the case may melt to flow down to the
freezer room.
If many hours of power failure is predicted, pull out the
case, remove the icecubes in it and replace it back when
power resumes.
7