Asus ET2210ENTS 사용자 설명서 - 페이지 25

{카테고리_이름} Asus ET2210ENTS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus ET2210ENTS 38 페이지. User manual

Secure the wall mount pad to the adapter

with the four screws (M3 x 8L) that came

with the kit, noting the correct orientation.

By following the instructions in the

installation manual that came with your

wall mount kit (VESA100), fasten the wall

mount bracket to the wall using the four

screws (M4 x 10L) provided in the kit.

Upright your All-in-one PC and hook it on

to the wall by sliding the grooves of the

wall mount pad into the bracket .

The wall mount kit in this illustration is for

reference only.

1. For machine ventilation, be sure to leave a distance of at least 6cm between the All-in-one

PC and the wall.

2. The wall mount kit should comply with VESA standards.

3. To ensure safety, please read the wall mount kit installation manual carefully before

mounting your All-in-one PC to the wall.

4. At least two persons are required to install or remove the All-in-one PC onto and from the

wall to avoid hazard of falling objects and breakage. Qualified personnel is recommended.

5. The wall should be able to sustain four times the weight of the All-in-on PC and wall mount

components combined (40kg at least). The mounting location must be able to withstand

earthquake or other impacts. Cement or masonry walls recommended.

All-in-one PC ET2410/ ET2210 Series