Dot Origin VTAP100-OEM 설치 매뉴얼 - 페이지 4
{카테고리_이름} Dot Origin VTAP100-OEM에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dot Origin VTAP100-OEM 13 페이지.
페이지 인쇄Safety instructions
WARNING: INTENDED USE
The VTAP100 equipment is intended for use by suitably qualified integrators, who will integrate the
VTAP100-OEM (PCB) into their own hardware. Although an optional wallbox case can be supplied.
Components mounted on the VTAP100 PCB are not user-serviceable.
WARNING: ESD PRECAUTIONS
We recommend careful handling and storage of Electrostatic Sensitive Devices (ESDs) during
installation. The VTAP100-OEM (PCB) should always be protected by static shielding bags for
shipping or storage.
WARNING: POWER SUPPLY
Use only a MicroUSB to USB cable, or the optional captive USB cable, if any, to connect the
VTAP100-OEM PCB to a PC. (Never connect both at the same time).
Using other cables will invalidate EMC emissions and immunity certifications.
The VTAP100 is rated at 5V DC @ 50 to 150mA for power over USB.
WARNING: USER DESIGNED ENCLOSURES
It is the responsibility of the integrator to ensure that their enclosure design for the VTAP100 retains
compliance with EMC emissions and immunity standards.
Integrators are responsible for evaluating their own end product (including the VTAP100-OEM PCB)
and obtaining separate approvals for the markets in which it will be sold or used.
VTAP100-OEM V3A INSTALLATION GUIDE
PAGE II