Dafra DRPB48V 운영 매뉴얼 - 페이지 6

{카테고리_이름} Dafra DRPB48V에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dafra DRPB48V 13 페이지.

DRPB48V Operation Manual

4) Use the oil injector (in the accessories pack) to slowly inject the oil until full (approx. 15ml).

Remove the injector and its adaptor, then clean off any excess oil on the tool and tightly

screw the screw (#11) back into the tool;

5) Test the tool stroke. If the stroke is still not what it should be, some air could have entered

the oil cylinder (#13) while refilling the oil in the tool. To release this extra air from the tool,

connect the tool to the air supply, pull the tool trigger (#48) 6 or 7 times, then loosen the

screw (#11), to let the extra air leak out and then tighten the screw (#11) again.