Dot Origin VTAP50 설치 매뉴얼 - 페이지 9
{카테고리_이름} Dot Origin VTAP50에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dot Origin VTAP50 16 페이지. Oem module
페이지 인쇄
3 Mechanical installation
The VTAP50 unit for OEM integration comprises a PCB with an integral antenna around the
perimeter of the board.
WARNING: Observe all Safety instructions when installing the VTAP50 PCB.
3.1 Power
Connect the PCB to a PC using either a MicroUSB to USB cable or the optional captive
cable (see section 3.4).
The VTAP50 is rated at 5V DC (typ. 110mA, max 150mA) for power over USB.
3.2 Environment
The VTAP50 must be stored and operated under the following conditions:
Ambient temperature -25 to +70°C (-13 to 158°F)
l
Humidity 0 to 95% RH non-condensing
l
Pressure 86-106kPa
l
VTAP50 OEM MODULE INSTALLATION GUIDE
Figure 3-1 VTAP50 components - v1 Hardware
PAGE 4