Dafra DRPB64V 운영 매뉴얼 - 페이지 4

{카테고리_이름} Dafra DRPB64V에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dafra DRPB64V 6 페이지.

DRPB64V Operation Manual

2) Connect the air supply and to place a cloth over the hole where the screw (#11) was

removed, then to pull the trigger (#48) and the oil will be forced out from the tool;

3) Screw the oil inject adaptor (in the oil injector set in the accessories pack) into the hole where

screw (#11) was removed;

4) Use the oil injector (in the accessories pack) to slowly inject the oil until full (approx. 15ml).

Remove the injector and its adaptor, then clean any excess oil off the tool and tightly screw

the screw (#11) back into the tool;

5) Test the tool stroke. If the stroke is still not what it should be, some air could have entered

the oil cylinder (#13) while refilling the oil in the tool. To release any extra air from the tool,

connect the tool to the air supply, pull the tool trigger (#48) 6 or 7 times, then loosen the

screw (#11), to let the extra air leak out and then tighten the screw (#11) again.