Dafra DRT510 운영 매뉴얼 - 페이지 3

{카테고리_이름} Dafra DRT510에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dafra DRT510 6 페이지.

DRT510 Operation Manual

SETTING UP THE TOOL

1. With the tool facing as pictured, set

the ratchet switch in the UP position.

2. Holding the forward handle still,

rotate the rear handle clockwise

until it clicks.

3. Rotate the rear handle anti-

clockwise 1 – 2 turns to create the

1.0mm gap. The tool is now ready

for use as the ratchet is engaged.

4. Screw a rivnut onto the mandrel

until approximately 1 thread of the

mandrel protrudes through the

rivnut.

5. Screw the anvil out until it engages

the head of the rivnut.

6. Tighten the locknut so that the anvil

is fixed in position.

PAGE 3