Dot-Spot clar 50 작동 및 설치 매뉴얼 - 페이지 11

{카테고리_이름} Dot-Spot clar 50에 대한 작동 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dot-Spot clar 50 16 페이지. High-performance led spot

페이지 인쇄

Safety instructions

During installation, the relative safety regulations have to be followed. The installation

may only be carried out by appropriately trained professionals. The power supply is oper-

ated at a voltage of 100 - 240 V. To avoid danger, prior to any work at spot and the power

supply, separate the supply cable from the mains.

Do not open the spot. Connect the spot to the included power supply only. A wrong

tension may destroy the spot and the power supply. Insert the power supply only if the

electrical tension indicated corresponds to the tension of your wall socket. In order to

protect the connection cable from rodents it should be run inside a protective tube. High

ambient temperatures shorten the life of the LED's. Ensure a good heat dissipation in

order to guarantee a long life of the LED. During operation, do not expose the spot to

ambient temperatures of > 40°C. The tightness of the clar 50/100 is only guaranteed if

also the outer sheath of the connection cable is undamaged and if the connection cable

is tightly screwed to the watertight plug connectors. Otherwise, because of the capillary

effect, the penetrating moisture can reach and destroy the electronics of the spot.

Preparation

According to the model, unpack all the parts included in the scope of delivery and check

them for completeness and intactness.

Dispose of the packaging material no longer needed in accordance with applicable regu-

lations. If you notice any damage from transport, please immediately contact the dealer

where you purchased the luminaire.

Scope of delivery clar 50:

■

1 clar 50 spot, 1 m connection cable with watertight connection plug

■

1 Mounting bracket

■

1 hex wrench

■

2 mounting screws with dowels

■

1 power supply 48 V, 60 W

■

1 operating and installation manual

Scope of delivery clar 100:

■

1 clar 50 spot, 1 m connection cable with watertight connection plug

■

1 Mounting bracket

■

1 hex wrench

■

2 mounting screws with dowels

■

1 power supply 48 V, 100 W

■

1 operating and installation manual

Safety instructions / Preparation / Scope of delivery