Asus Vintage P5945G 설치 매뉴얼 - 페이지 5

{카테고리_이름} Asus Vintage P5945G에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus Vintage P5945G 9 페이지. V-series desktop barebone

Lift the load lever in the direction of

the arrow to a 135º angle.

Lift the load plate with your thumb

and forefinger to a 100º angle (4A),

then push the PnP cap from the load

plate window to remove (4B).

Position the CPU over the socket,

making sure that the gold triangle

is on the bottom-left corner of the

socket. Fit the socket alignment key

into the CPU notch.

Close the load plate (A), then push

the load lever (B) until it snaps into

the retention tab.

Installing the CPU fan and heatsink assembly

The Intel

Pentium

heatsink and fan assembly to ensure optimum thermal condition and

performance.

To install the CPU heatsink and fan:

Place the heatsink on top of the installed

CPU, making sure that the four fasteners

match the holes on the motherboard.

Push down two fasteners at a time

in a diagonal sequence to secure the

heatsink and fan assembly in place.

When the fan and heatsink assembly is in

place, connect the CPU fan cable to the

connector on the motherboard.

4 LGA775 processor requires a specially designed

Installation Manual

PnP cap

Load plate

Gold

triangle

mark

Alignment key