Dot-x DNR V SERIES 사용자 설명서 - 페이지 12

{카테고리_이름} Dot-x DNR V SERIES에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dot-x DNR V SERIES 12 페이지. 25 inch display
Dot-x DNR V SERIES에 대해서도 마찬가지입니다: 사용자 설명서 (10 페이지)

페이지 인쇄

WALL INSTALLATIONS

Cooling:

Convection cooling will be adequate for most installations.

Internal cabinet temperature must not exceed 55

Stackability: Each monitor is enclosed in a heavy duty industrial metal

cabinet. Maximum recommended stack size is six units by

six units without additional support.

MOUNTING PLATE/

TIE BRACKET/CUBE

Order Part Number

13027526-007

CRT COATINGS OPTION

As an option a factory installed anti-glare coating may have been applied to

(131

F).

the CRT surface of your monitor. Due to static electricity, the monitor screen

will attract dust and under normal use will acquire fingerprints. Recognizing

that most people will touch the screen sooner or later causing these

fingerprints, we recommend you implement a simple cleaning program. The

anti-glare coating on your monitor is very durable and will stand up to routine

cleaning. To prevent damage when cleaning, use a non-abrasive household

glass cleaner to remove smudges and fingerprints. Do not use cleaners,

papers, or cloths which contain abbrasives that may damage the coating.

Highly abrasive materials, scouring pads or acid solutions should not be

used. Care must be taken when handling and cleaning this surface.

This monitor was inspected prior to shipment and found to meet Dotronix

CRT coatings standard. The Dotronix warranty does not apply to CRT's that

are scratched, or have imperfections in any special coatings.

DOT-X

Service Pack Contents