DAGE-MTI Investigater 사용자 설명서 - 페이지 11

{카테고리_이름} DAGE-MTI Investigater에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAGE-MTI Investigater 17 페이지. Ccd camera gater & frame grabber

VIDEO IN

The camera's video is placed into the

through this BNC or through the

should be taken so as to not attempt to place two video

sources into the

input signal is terminated into 75Ω. The monochrome

composite input video signal should comply with either EIA

RS-170A (525/60) or CCIR (625/50) video signal standards.

VIDEO OUT

The video output of the

BNC connector. The video has a source impedance of 75Ω

and provides 1V p-p output. The

determined by the front panel switches. Either the

video or the captured gated video is available. Care should

be taken to avoid no termination or double termination of the

output video, which would result in incorrect video levels.

InvestiGater

CAMERA

at the same time. The video

InvestiGater

VID OUT

InvestiGater

connector. Care

is available at this

output is

LIVE

either

input