DAGU RS025 매뉴얼 - 페이지 9
{카테고리_이름} DAGU RS025에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAGU RS025 12 페이지.
페이지 인쇄
Make sure the robot is turned off and connect it to your computer with a USB cable. The control board will be
powered by the USB cable while you upload the program but there will be no power to the motors. Go to the
"Tools" menu and select your USB serial port.
From the "Tools" menu choose the board type. The Doodle Bot controller is compatible with an Arduino NG or
older using an ATmega8 processor.
When you upload the program you will see a message indicating the program is compiling, then uploading.
When the upload is complete you can disconnect the USB. The robot is ready to go! Note: It is normal for the
robot to wait a few seconds before the program runs.