Asus MK241 Series 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} Asus MK241 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus MK241 Series 6 페이지. Asus mk241h: user guide
Asus MK241 Series에 대해서도 마찬가지입니다: 사용자 설명서 (24 페이지)

페이지 인쇄
Asus MK241 Series 빠른 시작 매뉴얼

Troubleshooting (FAQ)

Problem
Power LED is not ON
The power LED lights amber and there is no
screen image
Screen image is too light or dark
Screen image is not centered or sized properly • Press the
Screen image bounces or a wave pattern is
present in the image
Screen image has color defects (white does not
look white)
Screen image is blurry or fuzzy
No sound or sound is low
Webcam or array microphone is not working
Possible Solution
• Press the
button to check if the monitor is in
the ON mode.
• Check if the power cord is properly connected to
the monitor and the power outlet.
• Check if the monitor and the computer are in the
ON mode.
• Make sure the signal cable is properly connected
the monitor and the computer.
• Inspect the signal cable and make sure none of
the pins are bent.
• Connect the computer with another available
monitor to check if the computer is
properly working.
• Adjust the Contrast and Brightness settings via
OSD.
button for 2–3 seconds to
automatically adjust the image (VGA input only).
• Adjust the H-Position or V-Position settings via
OSD (VGA input only).
• Make sure the signal cable is properly
connected to the monitor and the computer.
• Move away electrical devices that may cause
electrical interference.
• Inspect the signal cable and make sure that
none of the pins are bent.
• Perform All Reset via OSD.
• Adjust the R/G/B color settings or select the
Color Temperature via OSD.
• Press the
button for 2–3 seconds to
automatically adjust the image (VGA input only).
• Adjust the Phase and Clock settings via OSD
(VGA input only).
• Ensure that thse audio cable is properly
connected to the monitor and the computer
• Adjust the volume settings of both your
monitor and computer.
• Ensure that the computer sound card driver
is properly installed and activated.
• Make sure that you have connected the USB .0
cable securely to both the LCD monitor and your
computer.
• Make sure that you use the Microsoft
Vista / XP Service Pack operating systems.
Quick Start Guide
®
®
Windows
5