Asus PA32DC 사용자 설명서 - 페이지 45

{카테고리_이름} Asus PA32DC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus PA32DC 47 페이지. Oled monitor

3.4

Troubleshooting (FAQ)

Problem

Power LED is not ON

The power LED lights amber and

there is no screen image

Screen image is too light or dark

Screen image bounces or a wave

pattern is present in the image

Screen image has color defects

(white does not look white)

No sound or sound is low

ASUS PA32DC OLED Monitor

Possible Solution

• Press the

button to check if the monitor is in the

ON mode.

• Check if the power cable is properly connected to

the monitor and the power outlet.

• Check if the AC switch is set to ON.

• Check if the monitor and the computer are in the ON

mode.

• Make sure the signal cable is properly connected the

monitor and the computer.

• Inspect the signal cable and make sure none of the

pins are bent.

• Connect the computer with another available monitor

to check if the computer is properly working.

• Adjust the Contrast and Brightness settings via

OSD.

• Make sure the signal cable is properly connected to

the monitor and the computer.

• Inspect the signal cable and make sure that none of

the pins are bent.

• Perform All Reset via OSD.

• Adjust the Color settings or select the Color

Temperature (Color Temp.) via OSD.

• Ensure that the HDMI/DisplayPort cable is properly

connected to the monitor and the computer.

• Adjust the volume settings of both your monitor and

HDMI/DisplayPort device.

• Ensure that the computer graphic card driver is

properly installed and activated.

3-19