Asus PA32U Series 사용자 설명서 - 페이지 18

{카테고리_이름} Asus PA32U Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus PA32U Series 35 페이지.
Asus PA32U Series에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 펌웨어 업데이트 절차 (12 페이지)

페이지 인쇄

2.4

Connecting the cables

Connect the cables as the following instructions:

• To connect the power cord: Connect one end of the power cord securely to

the monitor's AC input port, the other end to a power outlet.

• To connect the HDMI/DisplayPort cable:

Plug one end of the HDMI/DisplayPort cable to the monitor's HDMI/

DisplayPort jack.

Connect the other end of the HDMI/DisplayPort cable to your device's

HDMI/DisplayPort jack.

• To use the earphone: connect the end with plug type to the monitor's

earphone jack when an HDMI/DisplayPort/Thunderbolt signal is fed.

• To use the USB 3.0 ports:

Upstream: Take the supplied USB 3.0 cable, and plug the smaller end

(type B) of the USB upstream cable to the monitor's USB upstream

port, and the larger end (type A) to your computer's USB 3.0 port. Make

sure your computer is installed with the latest Windows 7/Windows 8.1/

Windows 10 operating system. That will enable the USB ports on the

monitor to work.

Downstream: Plug the USB Type A/Type-C cable of your device to the

monitor's USB Type A/Type-C jack.

• To connect the Thunderbolt cable:

Plug one end of the Thunderbolt cable to the monitor's Thunderbolt jack.

Connect the other end of the Thunderbolt cable to your Thunderbolt

device's jack.

While one Thunderbolt port is plugged, the other Thunderbolt port

outputs DisplayPort signal only.

The Thunderbolt ports offer Max.45W power delivery capability each. If

one Thunderbolt port is providing 45W power output, the other one has

extra 15W power delivery capability.

When these cables are connected, you can choose the desired signal

from the Input Select item in the OSD menu.

2-4

For service only

Chapter 2: Setup