Asus ROG STRIX XG259CM 매뉴얼 - 페이지 30
{카테고리_이름} Asus ROG STRIX XG259CM에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus ROG STRIX XG259CM 33 페이지. Gaming monitor
페이지 인쇄
3.4
Troubleshooting (FAQ)
Power LED is not ON
The power LED lights white and there is no
screen image
Screen image is too light or dark
Screen image bounces or a wave pattern is
present in the image
Screen image has color defects (white does
not look white)
Brightness decreases after displaying HDR
content for a period of time
3-10
Problem
Possible Solution
• Press the
button to check if the monitor
is in the ON mode.
• Check if the power cord is properly
connected to the monitor and the power
outlet.
• Check if the monitor and the computer are
in the ON mode.
• Make sure the signal cable is properly
connected the monitor and the computer.
• Inspect the signal cable and make sure
none of the pins are bent.
• Connect the computer with another
available monitor to check if the computer
is properly working.
• Adjust the Contrast and Brightness
settings via OSD.
• Make sure the signal cable is properly
connected to the monitor and the
computer.
• Move electrical devices that may cause
electrical interference.
• Inspect the signal cable and make sure
that none of the pins are bent.
• Perform All Reset via OSD.
• Adjust the R/G/B color settings or select
the Color Temperature via OSD.
• Turn off the monitor by pressing the power
button and then turn on the monitor.
• Turn off the monitor by disconnecting the
power cord and then turn on the monitor.
• Reactivate the HDR function on your
device.
Chapter 3: General Instructions