Asus ROG SWIFT OLED PG27AQDM 사용자 설명서 - 페이지 37
{카테고리_이름} Asus ROG SWIFT OLED PG27AQDM에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus ROG SWIFT OLED PG27AQDM 40 페이지.
페이지 인쇄
3.4 Troubleshooting (FAQ)
Problem
Power LED is not ON
The power LED lights red and there
is no screen image
Screen image is too light or dark
Screen image bounces, a wave
pattern or abnormal picture is
present in the image
Screen image has color defects
(white does not look white)
No sound or sound is low
3-14
Possible Solution
• Press the
button to check if the monitor is turned
on.
• Check if the adapter and power cord are properly
connected to the monitor and the power
outlet.
• Check the Power Indicator function in the OSD menu.
Select "ON" to turn on the power LED.
• Check if the monitor and the computer are turned
on.
• Make sure the signal cable is properly connected to
the monitor and the computer.
• Inspect the signal cable and make sure none of the
pins are bent.
• Connect the computer with another available monitor
to check if the computer is properly working.
• Adjust the Contrast and Brightness settings via
OSD.
• Make sure the signal cable is properly connected to
the monitor and the computer.
• Move electrical devices that may cause electrical
interference.
• Remove the adapter and plug it again to the power
outlet. Then turn on the monitor.
• Inspect the signal cable and make sure that none of
the pins are bent.
• Perform All Reset via OSD.
• Select the appropriate color temperature (Color Temp.)
via OSD.
• Adjust the volume settings of your monitor or
computer.
• Make sure the computer sound card driver is properly
installed and activated.
• Check the audio source.
Chapter 3: General Instruction