Asus ROG SWIFT PG258Q 사용자 설명서 - 페이지 22
{카테고리_이름} Asus ROG SWIFT PG258Q에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus ROG SWIFT PG258Q 31 페이지.
페이지 인쇄
•.
Level.1~4: The higher the level, the less blue light is scattered.
When Blue Light Filter is activated,the default settings of Racing Mode
will be automatically imported. Between Level 1 to Level 3, the Brightness
function is user-configurable. Level 4 is optimized setting. It is compliance
with TUV Low Blue Light Certification. The Brightness function is not user-
configurable.
To alleviate eye strain, rest your eyes for fifteen minutes for every two hours
spent in front of the screen. Frequent blinking and eye exercise helps keep your
eye moist to prevent them from drying out. In addition, your computer screen
should be placed 20 to 28 inches (50-70cm) away from you.
2..
Color
You can adjust Brightness, Contrast, Saturation, Color temperature and
Gamma from this menu.
Blue Light Filter
Color
Image
Input Select
System Setup
•.
Brightness: the adjusting range is from 0 to 100.
When NVIDIA 3D vision is enabled, Brightness will be changed
to NVIDIA
conventional 3D technology in 3D mode with zero increase in total energy
consumption*
*Compatible with the NVIDIA 3D Vision
function, turn off Gsync first and make sure that the input source is
DisplayPort.
•.
Contrast: the adjusting range is from 0 to 100.
•.
Saturation: The adjusting range is from 0 to 100.
•.
Color.Temp.: contains 4 modes including Cool, Normal, Warm, and User
Mode.
•.
Gamma: allows you to set the color mode to 2.4, 2.2 or 1.8.
3..
Image.
You can adjust OD, Adaptive Contrast Control, Dark Boost and ULMB from
this menu.
3-2
Brightness
Contrast
Saturation
Color Temp.
Gamma
MOVE/ENTER
®
.LightBoost
™
. You can enjoy twice the brightness of
Normal Mode DP 1920x1080@ 240Hz
ASUS ROG PG258Q
80
50
BACK
EXIT
®
2 kit. To activate NVIDIA 3D
Chapter 3: General Instructions
Racing Mode