Dahle 20394 운영 매뉴얼 - 페이지 3
{카테고리_이름} Dahle 20394에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahle 20394 8 페이지. 390 series high capacity shredders
Dahle 20394에 대해서도 마찬가지입니다: 운영 매뉴얼 (4 페이지), 사용 설명서 (5 페이지), 운영 매뉴얼 (4 페이지)
페이지 인쇄
SAFETY INSTRUCTIONS
Read the operating instructions carefully proir to starting up the unit!
Do not use in the vicinity of flammable liquids or gases.
Do not use in the vicinity of corrosive materials.
Do not expose to the wet.
Do not let children operate this office equipment.
Do not reach into the cutting mechanism during operation.
Do not use the shredder over a period of more than 5 minutes in no-load
operation (operation without paper).
Keep long hair clear of machine.
Keep neck-ties clear of machine.
Keep bracelets clear of machine.
Power supply must be accessible all the times.
Disconnect power supply before servicing.
The safety devices must not be manipulated with or removed.
Please make sure that the shredder gets sufficient ventilation (ventilating
flaps must kept free).
Product is not intended for use by children.
IMPORTANT - Model 20394: Do NOT shred staples and paperclips.
BEFORE YOU SHRED
Remove Transport Bolts with wrench provided.
Record the Model and Serial Number in the space provided inside the front
cover.
Be sure the electrical outlet provides the proper power for your shredder (see
rating label on rear of shredder).
Install Shred Bag (see: "CHANGING THE SHRED BAG").
TURNING ON YOUR SHREDDER
1. ON/OFF is controlled by the main switch (1.1) and
green push button (8) found on top of the shredder.
2. Pressing these buttons (main switch 1.1 first) turns
the shredder on and places it in the stand-by mode.
3. Pressing these buttons again turns the
shredder off.
ALWAYS TURN SHREDDER OFF IF IT WILL BE UNATTENDED FOR LONG PERIODS OF TIME
3