Dahle 20800 EC 운영 매뉴얼 - 페이지 4

{카테고리_이름} Dahle 20800 EC에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahle 20800 EC 4 페이지. Departmental shredders
Dahle 20800 EC에 대해서도 마찬가지입니다: 운영 매뉴얼 (4 페이지)

페이지 인쇄

20800 EC 20814 20822 EC 20830 EC 20831 EC 20835 EC

1. ON/OFF is controlled by the green push button (8)

found on top of the shredder.

2. Pressing this button turns the shredder on

and places it in the stand-by mode.

3. Pressing the button again turns the

shredder off.

SHREDDING

20801 S 20801 C

Turn shredder on. Insert paper squarely into

Feed Opening (3). Continue feeding paper into

Feed Opening until the shredding mechanism

begins to draw the paper in. At this point,

allow the paper to feed into shredder on its

own. When shredding is complete, turn

shredder off.

20800 EC 20814 20822 EC 20830 EC 20831 EC 20835 EC

Turn shredder on. Insert paper squarely into

Feed Opening (3). A light barrier will auto-

matically activate the shredding mechanism.

Continue feeding paper into the Feed Opening

until the shredding mechanism begins to

draw the paper in. At this point, allow the paper

to feed into the shredder on its own. Once the

paper has passed completely through the shredding mechanism, the electronic

controls will automatically stop the machine.

To shred a piece of paper too small to break the light barrier, press the

FORWARD button (7) once to override the auto ON/OFF function. The shredder

will continue to run until the FORWARD button is pressed again.

Microfiche and transparencies can also be shredded in the same manner as

paper, however, you should shred a piece of paper after every 8 or 10 sheets of

plastic. This helps clean plastic particles out of the shredding mechanism.

REMEMBER TO LUBRICATE YOUR SHREDDER ACCORDING TO INSTRUCTIONS

OfficeZone

www.officezone.com

CAPACITY

Capacity is the number of sheets of 8½" x 11" paper that can be shredded at one

time. These figures are approximate and machines may vary slightly due to

various conditions. It is not recommended that you try to run your shredder at

maximum capacity, as this increases the chance of a paper jam.

CLEARING A PAPER JAM

If too many sheets of paper are fed into your shredder at one time, it may cause a

paper jam. Running your shredder at maximum capacity increases the chance of

a paper jam. If a paper jam occurs, it is easy to clear by following these simple

steps:

20801 S 20801 C

1. Turn shredder off using ON/OFF/REVERSE switch (8a).

2. Firmly pull on paper sticking out of Feed Opening while holding

3. After paper has been removed from the Feed Opening, move the

4. Separate some of the sheets and continue shredding.

20800 EC 20814 20822 EC 20830 EC 20831 EC 20835 EC

The Auto-Reverse feature, built into the electronic versions of the General Office

Shredders, helps prevent paper jams. If the Auto-Reverse feature is activated an

audible alarm sounds and the Paper Jam Indicator (6) lights up. If this situation

occurs, follow these simple steps:

1. Remove paper from Feed Opening. The REVERSE button (7a) may be used

2. Separate some of the sheets and continue shredding.

(800) 543-5454

Model

20 Lb. Bond

20801 S

20801 C

20800 EC

20814

20822 EC

20830 EC

20831 EC

20835 EC

ON/OFF/REVERSE switch in the REVERSE (R) position.

ON/OFF/REVERSE switch back to the ON (I) position.

if excess paper remains in the Feed Opening. Clear shredding mechanism

by pressing the FORWARD button (7).

IT IS NOT RECOMMENDED RUNNING SHREDDERS AT MAXIMUM CAPACITY

16 Lb. Bond