Dotsmann DCF-77 사용 설명서 - 페이지 7

{카테고리_이름} Dotsmann DCF-77에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dotsmann DCF-77 16 페이지. Wireless 433mhz weather station

2.
Press the SET key to confirm and enter the "Time Zone setting" or exit the
setting mode by pressing the CH key.

TIME ZONE SETTING

The time zone default of the Weather Station is 0. To change to another time zone:
1.
Press the SET key after completing the LCD contrast setting in order to enter
the time zone setting (flashing).
2.
Using the IN key, set the time zone. The range runs from 0 to +12 and then
runs from -12 back to 0 in consecutive 1 hour intervals.
3.
Press the SET key to confirm and enter the "Time Reception ON/OFF
setting" or exit the setting mode by pressing the CH key.

TIME RECEPTION ON/OFF SETTING

In area where reception of the DCF-77 time is not possible, the DCF-77 time
reception function can be turned OFF. The clock will then work as a normal Quartz
clock. (Default setting is ON).
1.
The digit "ON" will start flashing on the LCD.
2.
Use the IN key to turn OFF the time reception function.
3.
Confirm with the SET key and enter the "12/24-Hour Display setting" or exit
the setting mode by pressing the CH key.
Note:
If the Time Reception function is turned OFF manually, the clock will not
attempt any reception of the DCF time as long as the Time Reception OFF
function is activated. The Time Reception icon will not be displayed on the
LCD.

12/24 HOUR TIME DISPLAY SETTING

1.
After setting time reception ON/OFF, press the SET key, "12h" or "24h"
flashes in the LCD.
24
Time Zone (flashing)
Flashing
Flashing