DOTWORKZ COOLDOM ST-CD-24V 설치 매뉴얼 - 페이지 5

{카테고리_이름} DOTWORKZ COOLDOM ST-CD-24V에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DOTWORKZ COOLDOM ST-CD-24V 17 페이지. S-type cooldome enclosure

Prevents Humid Air exchange from venting thru electrical conduit into Dotworkz sealed enclosure.

QUICK INSTALLATION GUIDE

1) Pull wires to final installed length.

2) Open Vent Stop Plug and install over wire.

3) Pinch Plug to compress over wire, and

insert into conduit feed mouth.

VENT STOPPER PLUGS for Conduit

Foam Conduit Feed Plugs for ½" I.D. Conduit

Thus eliminating condensation issues within Dotworkz sealed enclosures.

4) Push plug into conduit mouth with finger

tips till it flush with outside of fitting.

5) Repeat steps 1-4 for any other conduit

feeds as needed.

6) To assure an airtight seal, caulk around

wires and cables, coating entire plug surface

with sealant.