DOTWORKZ STXL-CD 설치 매뉴얼 - 페이지 7

{카테고리_이름} DOTWORKZ STXL-CD에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DOTWORKZ STXL-CD 13 페이지.

With the larger Allen wrench (provided) remove the

bolt on the bottom of the arm that allows it to be

opened.

--------------->

Pivoting

point of

the arm

knuckle

Fit the arm knuckle onto the arm with the pivoting

point of the arm knuckle towards the front of the

arm. With the larger Allen wrench (provided) tighten

the 3 bolts.

Run necessary cables (power, network, etc...)

through arm and arm knuckle.

See Appendix A if mounting a power supply inside

the arm.

First, add the cable gland nut to your network or

power cable. Second, add the cable gland rubber

seal with the tapper end away from the end of the

cable. Lastly, add the black mesh sleeve to cables.