Double Apex MK7 Garage Control 설치 매뉴얼 - 페이지 5

{카테고리_이름} Double Apex MK7 Garage Control에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Double Apex MK7 Garage Control 17 페이지. Garage control

Step 1A - For Dip Switch Models

1. Find your brand opener in Appendix B and note the number of times to

press the button on the control box.

2. Match the dip switch settings in the control box to those on the opener.

Turn extra switches "Off", or opposite the "ON" marking on the switch

panel.

3. Make sure your garage door is closed. Press and hold the program

button in the control box until the LED illuminates. (Figure A)

4. For single button Garage Controls select button SW1in the control box

(Figure B) and press it the number of times shown in Appendix B,

making sure the LED stops flashing after each press. The code is ac-

cepted when the garage door opens. Press the program button on the

control box. Programing is complete. Press the chosen button to test.

5. For two button Garage Controls repeat the previous steps with your

second opener using button SW2

Once the control is programmed REMOVE THE BATTERY by

hand or with a non-metal tool.

Figure A

Figure B