Dahle DAHLE 450 Series 운영 매뉴얼 - 페이지 6
{카테고리_이름} Dahle DAHLE 450 Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahle DAHLE 450 Series 7 페이지. Hopper feed shredder
Dahle DAHLE 450 Series에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지)
페이지 인쇄
SHREDDING
Turn shredder on. Press Forward Button (4) to begin shredding operation.
The shredder can be fed either from the top or the front. For this purpose, a
feed opening is provided on the top for emptying waste paper baskets (paper
only) and at the front for feeding cut stock and continuous forms.
Three (3) EDP shelves can be folded up to facilitate the shredding of
continuous forms.
The shredder will not operate unless the Waste Door (9) and Access Door (13)
are completely closed.
Microfiche and transparencies can also be shredded in the same manner as
paper, however, you should shred a piece of paper after every 8 or 10 sheets
of plastic. This helps clean plastic particles out of the shredding mechanism.
CAPACITY
Capacity is the number of sheets of 8½" x 11" paper that can be shredded at
one time. These figures are approximate and machines may vary slightly due
to various conditions. It is not recommended that you try to run your shredder
at maximum capacity, as this increases the chance of a paper jam.
Model
20452
20453
20 Lb. Bond
85
65
16 Lb. Bond
100
85
1-800-658-8788 - www.abcoffice.com