Electra Light DMX512 매뉴얼 - 페이지 2

{카테고리_이름} Electra Light DMX512에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electra Light DMX512 4 페이지. Opti led 18*10w ip65 rgbw 4in1

페이지 인쇄

First

thanks you for using our company's

advanced lamp source cold light LED to make the light source, overcame the

traditional light source power consumption to be big, the service life was short, the

temperature higher shortcoming, had the power loss to be few, the life long (in

ordinary circumstances might achieve about 60,000 hours), brightness was high,

color bright and so on characteristics, was the present stage lighting and each kind of

effect decoration ideal product.

Important notice

This lamp should have good ground connection since it belongs to I Grade

protective equipment, professional operator is required for power connection.

Be sure the voltage is not higher or lower than the manual instructions' rating.

Be sure the power line is in good condition, no damage.

It must be power-off while does not use the lamp or before cleaning it.

Only permitted plug connects with the power line, please take care of the power

line while pull out the plug.

Attention:

Taking care of the operation while installing, avoiding to touch the exposed power

line, otherwise, it will result terrible electric shock.

Do not looks straight ahead of the lamp, or your eyes will get injured.

The lamp should far away from children and non-professional operation.

Operation Stipulation:

The lamp can only use indoor and it must under the consistent power condition.

Please pay attention to the installation, and do not swing the lamp while using it .

Please be sure the lamp is under right place (no too hot or damp),

before installing it, 0.5m distance above needed between the lamp and

the object illuminated.

Please use appropriate and safe power line to connect the lamp.

Please be sure to familiar with the lamp function before operating, since damage

mainly due to improper operation, thus professional operation is needed for

operation.

Please use original package while transportation.

Please do not modify the lamp, any un-authorized or un-professional operation is

not guaranteed by the factory, any breakdown and damage, the factory has no

obligation for maintenance.

products, it used in the present world most

Setting DMX512 console channel address:

After starting DMX512 console, etc. LCD display console initialization has been

completed, press Program key, until the top of the light is flashing, then press the

button below channel 1, channel 1 indicator light DMX512 console's address is

10000000, to promote channel faders can be DMX512 console control. Choose

DMX512 address consistent with DIP, light to enter the DMX512 control console for

the state. The products selected as 10000000 DMX512 console take effect.

Specification:

Rated voltage: 90V-230VAC, 50/60Hz

Power Consumption:150W

Lamp:18*10W LED (4 IN 1)

Lamp life: 50,000 hrs

Strobe Pulse:0-12Hz

DMX512 Channels: 4/8/10/11CH

Function: Auto-run feature, DMX-512 control console, Voice-activated functions

Protect Level:IP65

Work Environment: -25℃~+35℃

Fixtures Size:30*30*36CM

Weight:10KG