Doug Fleenor Design PRESET 10 PORTABLE 소유자 매뉴얼 - 페이지 4
{카테고리_이름} Doug Fleenor Design PRESET 10 PORTABLE에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Doug Fleenor Design PRESET 10 PORTABLE 11 페이지.
Doug Fleenor Design PRESET 10 PORTABLE에 대해서도 마찬가지입니다: 소유자 매뉴얼 (6 페이지)
페이지 인쇄
REAR INTERFACE
The PRE10ETHER-A has a set of rear mounted controls that are accessed during initial
commissioning of the wall station. The rear interface changes network settings, lockouts
and button behavior. Once setup is complete, this interface remains facing into the two
gang wall box and is not accessed by users changing presets on the front interface.
The rear interface has a monochrome graphical Liquid Crystal Display (LCD), and a
rotary encoder with a button. The LCD displays the configuration pages which are
edited by turning the encoder, and pressing the button. The configuration page changes
when the page change symbol is highlighted [< >] and the encoder wheel is turned.
Depressing the encoder shaft acts as a button to toggle between the editable fields on
the screen. A highlight appears in the background of the editable field, at which point
the wheel changes the highlighted value. In addition to the LCD and encoder based
configurations, three jumpers select settings that are not accessed in the LCD menus.
Page 4 of 10