Dahua 42C212TNI 빠른 시작 매뉴얼 - 페이지 18

{카테고리_이름} Dahua 42C212TNI에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua 42C212TNI 20 페이지. 2 mp ptz in-ceiling network camera

2. Select the recording medium for each event Recorded and Snapshot event, Scheduled, Motion

Detect and Alarm. Select the Local check box to record an event to the Micro SD card.

3. Click the Local tab to view the used capacity and the total capacity of the Micro SD card.

4. Expand the Event menu, located at the left of the Web interface, then select the Abnormality page

to set alarms related to the Micro SD card. The contains the following Micro SD card alarm

options:

• No SD Card: Device triggers an alarm if the device does not contain a Micro SD card.

• Capacity Warning: Device triggers an alarm when the data on the Micro SD card passes a

defined threshold.

• SD Card Error: Device triggers an alarm if it detects an issues writing data or retrieving data

from the Micro SD card.

5. Select the event from the Event Type pull-down menu (No SD Card, Capacity Warning, SD Card

Error).

6. Check the Enable box to activate the alarm for this event.

7. Check the Relay-out box to enable a relay alarm. Then, specify the time in seconds to delay the

alarm relay output (10 s to 300 s).

Figure 5-6

Figure 5-7