Colzer AF500 매뉴얼 - 페이지 6

{카테고리_이름} Colzer AF500에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Colzer AF500 7 페이지. Hepa air scrubber

TROUBLESHOOTING

PROBLEM

Air Scrubber does

not turn on

Air Scrubber starts

and then shuts off

Air Scrubber vibrates

Air Scrubber change light

illuminated

Motor makes noises, but

Air Scrubber won't turn on

Thank you for purchasing this product. Please read the instructions

carefully and follow all warnings. All products are manufactured to be

easy to use and provide years of worry free service when the

recommendations in this manual are followed. Please call at with any

questions or concerns.

POSSIBLE CAUSE/SOLUTION

• Switch not turned on – turn on

• Circuit breaker or GFCI has tripped - push reset button

• No power to scrubber – make sure unit is plugged in; check power supply

• Faulty switch - replace

• Obstructed inlet/outlet – remove obstruction

• Faulty motor - replace

• Motor shaft is bent – replace motor

• Fan blade is bent – replace

• Excessive dirt built up on fan blade – clean by wiping with a

slightly damp cloth.

• HEPA filter needs replacement - replace

• Air intake restricted – remove restriction or bends/kinks in ducting

• Damaged/faulty motor or motor shaft – replace

• Broken/loose wire to capacitor – tighten

• Damaged/faulty capacitor – replace

• Damaged housing/fan so fan will not spin – replace housing or fan wheel

• Motor shaft set screw holding fan wheel is loose - tighten