Colzer CFT4.0D 사용자 설명서 - 페이지 15

{카테고리_이름} Colzer CFT4.0D에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Colzer CFT4.0D 17 페이지.

TROUBLE SHOOTING GUIDE

Error Code

Error Description

The 2

Humidity Sensor Fault

The 1

Inlet Temperature Sensor Fault

The 3

The 4

Power Phase Fault (Missing phase or Reverse

phase)

High-Pressure Fault

Low-Pressure Fault

Compressor Current Overload Fault

Fan Current Overload Fault

The water bucket of the pump is full

Display Fault

Please try the below steps to reset the dehumidifier:

1) Turn the dehumidifier off;

2) Press and hold both the TIMING/FUNCTION button and UP button for 3 seconds, until dF

flashes on the LCD screen;

3) Press the TIMING/FUNCTION button once;

4) Wait for 5 seconds before any other operations.

The below chart will help you solve common problems that may occur. If the problem you come

across can not be fixed after troubleshooting or the problem is not listed in the below

troubleshooting chart, please contact COLZER customer service to obtain professional support at

Defrosting Temperature Sensor Fault

Temperature Sensor Fault

Notes

Press any button on the

control panel will eliminate

the audio alert. The

dehumidifier can still work

to dehumidify.

After troubleshooting,

unplug the dehumidifier and

then re-plug it in to

eliminate the alert.

You are unable to control

the dehumidifier via the

control panel.