Doug Fleenor Design RERUN-A 소유자 매뉴얼 - 페이지 3
{카테고리_이름} Doug Fleenor Design RERUN-A에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Doug Fleenor Design RERUN-A 15 페이지. Architectural dmx512 recorder
SPECIFICATIONS
Connector:
Connector pin out:
Input Circuit:
Output Circuit:
Isolation:
Indicators:
User controls:
Option Jumpers:
JP1
JP2
JP3
JP4
JP5
JP6
Terminal block #1
Phoenix Contact MSTB series
5 position two part terminal block
Model: MSTB 2,5/5-ST-5,08
Order number: 17 57 04 8
Terminal Block #1 (DMX512 Output)
1 (C) DMX512 common
2 ( -)
DMX512 data -
3 (+)
DMX512 data +
4 (C) Supply common
(internally tied to pin1)
5 (V)
Supply voltage "hot"
ESD protected EIA-485 transceiver (LT1785)
ESD protected EIA-485 transceiver (LT1785)
None. DMX input is not isolated from DMX output.
Ten green SHOW LEDs
One green PAUSE LED
One green LOOP LED
One yellow START LED
One yellow END LED
One red INPUT/RECORD LED
Ten [SHOW] buttons
One [PAUSE] button
One [LOOP] button
One [REWIND] button
One [FORWARD] button
One recessed [RECORD] button
INSTALLED
Recording enabled
Run show on DMX512 loss
Normal operation
Normal operation
Pile-on mode disabled
Normal operation
Terminal block #2
Phoenix Contact MSTB series
3 position two part terminal block
Model: MSTB 2,3-G-5,08
Order number: 17 55 74 9
Terminal Block #2 (DMX512 Input)
1 (C) DMX512 common
2 ( -)
3 (+)
REMOVED
Recording/editing disabled
Hold last look on DMX512 loss
Run hardware test
Factory use only
Pile-on mode enabled
Erase memory (DANGER!)
Page 3 of 14
DMX512 data -
DMX512 data +