Colzer YC-100A 사용 설명서 - 페이지 15

{카테고리_이름} Colzer YC-100A에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Colzer YC-100A 16 페이지. Built-in wine cooler

Colzer YC-100A 사용 설명서

TROUBLESHOOTING GUIDE

Before you reach out to Colzer customer service, please check if you can resolve the problems
according to the following hints.
PROBLEM
The wine cooler
does not run.
The wine cooler
is not cold
enough.
The compressor
turns on and off
frequently.
POSSIBLE CAUSE
The wine cooler may not be plugged
in, or plug may be loose.
The wine cooler is turned off.
House fuse blown or tripped circuit
breaker.
External environment may require a
higher setting.
The wine cooler has recently been
disconnected for a period of time.
Prolonged or frequent door
openings.
The door is not closed completely.
The door gasket does not seal
properly.
The room temperature is hotter than
normal.
A large amount of contents has been
added to the cooler.
Prolonged or frequent door
openings.
The temperature has not been set
correctly.
The door is not closed completely.
The door gasket does not seal
properly.
SOLUTION
Ensure the wine cooler has been
plugged in properly.
Press
to turn on the cooler.
Check/replace fuse. Reset circuit
breaker.
Set a colder setting. Allow several hours
for the temperature to stabilize.
It takes 3-4 hours for the Wine Cooler to
cool down completely.
Open the door less often.
Close the door properly.
Check the door gasket. Clean or change
gasket if necessary.
It's normal for the wine cooler to work
harder under these conditions.
A large amount of contents cause the
wine cooler to run more until the
desired temperature is reached.
Open the door less often.
Press either
or
the set temperature, and set the
temperature properly.
Close the door properly.
Check the door gasket. Clean or change
gasket if necessary.
to check